Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Pasadena?
Gate repair in Pasadena typically costs $150 to $450, and most residential driveway gate fixes land in the $200 to $350 range. Electric gate repair runs more, usually $250 to $850 depending on whether the problem is a motor, a control board, a loop detector, or the wiring that ties them together. New gate installation is a separate budget, generally $2,500 to $7,500 for a residential automatic driveway gate, and the written estimate always sets the final price.
This is a pricing guide for Pasadena, TX, written by a team that spends its days on gates and nothing else. We don’t sell garage doors, we don’t do handyman work, and we don’t swap out a working gate just to sell a new one. If you’d rather have a number for your specific gate, call (855) 772-8171 and we’ll set up a free estimate.
Quick Answer: What You’ll Pay in Pasadena
Here’s the short version before the details. A simple mechanical fix (a hinge, a latch, a bent arm) is the cheapest repair. An electrical fault or a dead operator pushes the price up fast because diagnosis takes longer and parts cost more. A full replacement only makes sense when the frame or panels are beyond safe repair. We work on your brand, whatever it is, so the estimate starts from what’s actually installed at your property, not from what we’d prefer to sell you.
- Small mechanical repair: $150 to $300
- Electric gate repair (motor, board, sensor): $250 to $850
- Gate installation (residential automatic): $2,500 to $7,500
Gate Repair Cost Breakdown (2026)
Below are the typical ranges we see for the most common jobs in Pasadena. These are estimates for planning, not a quote. The written estimate you get after we look at the gate is the number that counts.
| Repair Type | Typical 2026 Cost | What It Covers |
|---|---|---|
| Hinge, latch, or roller repair | $150 – $300 | Replacing worn hardware, adjusting swing, re-aligning hang points |
| Gate arm / operator repair | $250 – $600 | Fixing the swing or slide arm, replacing a stripped gear or worn linkage |
| Motor replacement | $400 – $850 | New operator motor matched to gate weight and travel distance |
| Control board replacement | $300 – $650 | New logic board, rewiring, reprogramming remotes and keypads |
| Loop detector / safety sensor repair | $200 – $500 | Replacing an in-ground loop, fixing a vehicle sensor, reinstalling safety edges |
| Access control (keypad, card reader, intercom) | $250 – $700 | Repairing or replacing entry hardware and its wiring to the operator |
| Track or guide repair (slide gates) | $200 – $550 | Straightening track, replacing rollers, re-setting the gate on its guides |
| Wiring and power fault | $250 – $600 | Locating a fault, replacing damaged low-voltage or line wiring |
| Full residential gate installation | $2,500 – $7,500 | New gate, operator, and access hardware installed as a system |
What pushes a price up: an intermittent fault that doesn’t reproduce on the first visit, a motor that’s undersized for the gate it’s driving, a gate that’s been out of alignment for a while so multiple parts have worn together, and any job where the wiring has to be traced through conduit. What pulls it down: a clear, single-point failure (a dead battery backup, a bad remote, a stuck limit switch), a gate that’s physically sound and just needs an adjustment, and a brand we already know well. We’re trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, which means we’re not spending the first hour of your estimate learning your system from scratch.
What Affects Gate Repair Pricing in Pasadena
Pasadena is a mix of older residential streets and busy commercial and industrial corridors, and the gate stock reflects that. A large property with a heavy commercial slide gate has a very different cost profile from a single-family driveway swing gate. Here are the factors that move the number most.
- Gate type and weight. A lightweight residential swing gate is the simplest and cheapest to fix. A heavy slide gate or a commercial cantilever gate needs heavier hardware, longer travel, and more robust operators, which costs more to repair. Old steel gates that have been sitting in the Houston-area humidity also tend to have more corrosion and rust at the pivot points, which means more hardware to replace.
- Electric vs. manual. Manual gate repairs are almost always mechanical and stay in the low end. Electric gate repair is where diagnosis, control boards, sensors, and wiring come in, and that’s the bulk of what drives cost. Electric gate repair is a core competency for us, not a side service, so we’re set up to diagnose motor, board, loop, and access failures efficiently.
- Brand and parts availability. A common operator from one of the nine brands we service means parts are straightforward to source. A discontinued or obscure operator means either finding compatible parts or explaining honestly when a replacement is the better value. We work on your brand, whatever it is, and we’re not incentivized to push a preferred brand.
- Access and site layout. A gate set back on a long driveway, behind landscaping, or on a tight commercial apron adds time to the job. Where the operator and control panel sit relative to the gate matters, especially if the wiring runs through buried conduit.
- How long the fault has been there. A gate that’s been stuck for a week is usually cheaper for us to fix than one that’s been running out of alignment for months, because a persistent misalignment grinds down rollers, hinges, and gears at the same time.
- What the gate replaces or protects. An HOA or commercial gate tied into an access-control system needs the repair to leave the whole system working, not just the gate moving. That adds a step: verifying keypads, card readers, and loop detectors are back online before we consider the job done.
Mechanical vs. Electric Gate Repair: Where the Money Goes
Mechanical problems are the easiest to price because the fault is usually visible. A sagging gate, a hinge that’s pulled loose, a roller that’s worn flat, a latch that won’t catch, or a slide gate that’s wandered off its track: these are typically $150 to $550. Diagnosis is quick, parts are off-the-shelf, and the job is done in a single visit most of the time.
Electric gate repair is a different budget. The gate can look perfectly fine and still not open because the operator’s control board has failed, a loop detector thinks a car is parked in the driveway, or a safety edge is reading a phantom obstruction. That kind of fault takes systematic diagnosis. Motors, control boards, loop detectors, access systems, and safety sensors each fail in different ways, and the cost range ($250 to $850) reflects how much of the system has to be involved. This is the work that stumps generalists, and it’s exactly what we’re built for. If you’ve had a handyman or a garage-door company out and the gate still isn’t right, that’s a sign to bring in a gate repair team that does this every day.
How Much Does Electric Gate Repair Cost in Pasadena?
Electric gate repair in Pasadena typically runs $250 to $850, and the final number depends on which part of the system has failed. A bad remote or keypad is at the low end. A motor or control board replacement is at the high end.
- Motor replacement: $400 to $850, matched to gate weight and travel
- Control board: $300 to $650, including reprogramming
- Loop detector or safety sensor: $200 to $500
- Access control hardware: $250 to $700
- Wiring fault: $250 to $600
One safety note on the electrical side: gate operator wiring and power are not a homeowner DIY job. A gate operator runs on line voltage at the panel and low voltage at the controls, and the safety devices (loop detectors, photo eyes, safety edges) exist specifically because a gate can injure someone if they fail. If your gate is dead and you smell burning at the control box or see damaged wiring, don’t open the enclosure. Call us and let a technician handle it. Call (855) 772-8171 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Can You Fix My Gate the Same Day?
Often, yes. Many mechanical repairs and common electric faults can be diagnosed and fixed in a single visit, provided the right parts are on hand or readily available for your brand. We dispatch from 7am to 7pm, Sunday through Friday, and same-day service is common for straightforward jobs.
Some repairs need a return visit: a loop detector that has to be cut into the driveway, a motor that has to be ordered for an older operator, or a control board that isn’t in stock locally. In those cases we’ll tell you upfront what we’re waiting on and what the plan is, so you’re not left wondering. Diagnosis first, solution second. That approach keeps you from paying for parts you didn’t need.
Is It Cheaper to Repair or Replace a Gate?
Repair is almost always cheaper than replacement, and it’s the right call whenever the gate frame and panels are structurally sound. A $300 to $600 repair on a gate that has years of service left makes far more sense than a $2,500 to $7,500 replacement. We start from repair because that’s usually the better value for you.
Replacement wins in a few specific cases: the frame is rusted through or bent beyond safe repair, the gate has failed at enough points that a repair bill would approach the cost of a new one, or the existing gate is simply the wrong size or type for how the property is now used. If your gate is a persistent problem because the operator was always undersized for the gate’s weight, replacing both as a matched system can end the cycle of repairs. We’ll walk through both options honestly and put the numbers in front of you. A free estimate is the fastest way to get that comparison. Call (855) 772-8171.
How to Save on Gate Repair
There’s no secret to spending less on gate repair: you save by fixing the actual problem and by not letting small faults turn into big ones. A few things genuinely help.
- Get it diagnosed before parts get ordered. A technician who diagnoses first and recommends second won’t sell you a motor when the fault was a $200 loop detector. Insist on a clear explanation of what failed and why.
- Fix the small stuff early. A hinge that’s just starting to pull loose is a hardware repair. Left alone, it lets the gate sag, which grinds the operator, which turns a $200 job into an $800 one. Catching a fault early is the single biggest saver.
- Keep the gate track and rollers clear. On a slide gate, debris and worn rollers are a common cause of strain on the motor. Clearing the track and replacing rollers when they wear is cheap; replacing a motor that burned out pushing a dragging gate isn’t.
- Match the operator to the gate. If you’re replacing a motor, put in one rated for your gate’s weight and travel. An undersized operator works hard, fails early, and costs more over time.
- Ask for the written estimate up front. Our estimates are free, and the written estimate sets the final price. That means no surprises after the work starts. Call (855) 772-8171 to book one.
One more saver: know your brand. If you can tell us the make of your operator when you call, we can arrive already familiar with it. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and being trained across nine major brands means faster diagnosis and fewer wasted visits.
What Happens When You Call
When you call (855) 772-8171, we ask a few practical questions: what the gate is doing, whether it’s manual or automatic, what brand the operator is if you know it, and whether it’s a residential, HOA, or commercial property. Those answers help us decide what to bring and who to send. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
At the estimate, a technician looks at the gate, the operator, and the controls, then explains what’s wrong in plain terms and gives you a written price. You decide from there. No pressure, no invented urgency, no swapping a repairable gate for a new one. We’re gate specialists, not generalists, so every technician on the job does this work and only this work.
Why Choose a Gate Specialist in Pasadena
A gate is a mechanical system, an electrical system, and an access-control system at the same time. A generalist handles one piece and guesses at the others. That’s why a gate that’s been “fixed” twice can still be broken. Our technicians have up to 15 years of experience, and our whole focus is gate repair, electric gate repair, and gate installation. From a stuck gate to a full installation, we cover the lifecycle, so you don’t need a second vendor when your needs change.
That focus shows up in the diagnosis. Motor, control board, loop detector, and access-system failures that stump generalists are the everyday work here. And because we’re brand-agnostic and trained across nine major brands, we service what’s already installed instead of steering you toward a replacement for profit. If you’re comparing Pasadena Gate Service against a general handyman or a garage-door company that does gates on the side, ask one question: do they work on your brand, and do they do electrical gate work? If the answer is no to either, you’re paying for a learning curve.
New Gate Installation Costs in Pasadena
A new residential automatic driveway gate typically runs $2,500 to $7,500 in the Pasadena area, depending on gate size, material, operator, and access hardware. That range covers the gate itself, the operator, and the controls as a matched system. Commercial and HOA installations are priced per project after an on-site estimate, because traffic volume, access control requirements, and gate size vary too much to price from a table.
If you’re installing rather than repairing, the same brand coverage matters. Whether you want a LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule system, we can spec it to your gate and your traffic. Getting the operator matched to the gate on day one is the difference between years of smooth operation and a cycle of repairs. Call (855) 772-8171 for a free estimate.
FAQs – Gate Repair Cost
How much does gate repair cost in Pasadena?
Gate repair in Pasadena typically costs $150 to $450, with most residential driveway gate fixes landing between $200 and $350. Electric gate repair runs $250 to $850 depending on the failed component. Call (855) 772-8171 for an exact quote – estimates are free.
How much does electric gate repair cost?
Electric gate repair typically costs $250 to $850 in Pasadena. Motor replacement is $400 to $850, control board replacement is $300 to $650, loop detector and safety sensor repair is $200 to $500, and access control hardware is $250 to $700. Call (855) 772-8171 with your brand in hand and we’ll narrow it down.
Can you come today?
Often, yes. Same-day service is common for mechanical repairs and many electrical faults, with fast dispatch from 7am to 7pm, Sunday through Friday. Some jobs need a return visit for a part, and we’ll tell you that upfront. Call (855) 772-8171 for a free estimate.
Is it cheaper to repair or replace a gate?
Repair is almost always cheaper, usually $150 to $850 versus $2,500 to $7,500 for a full residential installation. Replacement only wins when the frame or panels are beyond safe repair or the existing operator was never matched to the gate. Call (855) 772-8171 and we’ll compare both honestly.
Do you work on my gate brand?
In most cases, yes. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we’re trained to work on the system you already have. Tell us the brand when you call (855) 772-8171 and we’ll confirm it before we book.
Is gate repair dangerous to do myself?
Parts of it are. A gate operator’s wiring and power should only be handled by a trained technician, and heavy gate panels and slide gates that come off the track can crush or trap. Safety sensors exist because gates injure people when those devices fail. Don’t open the control enclosure or remove safety devices yourself. Call (855) 772-8171 and let a specialist handle it.
Get a Free Gate Repair Estimate in Pasadena
If your gate is stuck, dragging, won’t open on command, or has a control box that’s gone quiet, the fastest move is a call. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, the written estimate sets the final price, and every technician on the job is a gate specialist. Call (855) 772-8171 and we’ll get your gate working again.
Pricing reflects the Pasadena market as of 2026. Pasadena Gate Service offers free estimates – call (855) 772-8171.
Written by the team at Pasadena Gate Service.
What Our Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Erin Thompson"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Brooke Rhodes"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Danielle Sutton