Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across South Houston
If your electric gate stopped working, you’re likely searching for someone who actually knows gate operators, not a handyman who’ll guess. We’re gate specialists, and South Houston is one of our home service areas. Our technicians have up to 15 years of experience, and they arrive familiar with your gate’s brand and its operator instead of learning on your driveway. That matters here: the gates in this town aren’t the ornamental kind you see elsewhere in the Houston area. They’re working gates on working lots, and they fail in specific ways.
Call (855) 772-8171. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and the estimate is free.
Why South Houston Homeowners Call Pasadena Gate Service for Electric Gate Repair
South Houston is a small, densely packed pocket where homes sit right beside truck yards, workshops and industrial lots. That mix shapes everything about gate repair here. We understand that because we serve South Houston regularly, and our electric gate repair team is built around exactly this kind of work: motor, control board, loop detector and access-system failures on gates holding real security lines.
What you get from us is diagnosis first, solution second. We work on your brand, whatever it is, rather than steering you toward a replacement for our own profit. Homeowners, HOA managers and commercial property owners in South Houston call us because a generalist couldn’t identify their operator, and a multi-trade company split its attention. Every technician here is a gate specialist. That single focus means faster diagnosis and a more accurate fix, whether the problem is a dead motor or a post that’s quietly rotted out from underneath a perfectly good operator.
Response to South Houston is straightforward. Call and we book you in, with same-day service available when the schedule allows. The estimate is free and the price is quoted and agreed before any work starts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Automatic Gate Repair in South Houston
Automatic Gate Repair in South Houston usually starts with a gate that still has power but won’t move, move smoothly, or stay put. On the mixed-use lots around here, that’s rarely a mystery component. An operator that runs while the panel drags is a classic sign of a hinge post that’s rusted through at the ground line, and no amount of hinge adjustment fixes a post that’s given up. A qualified local pro checks the footing and the weld points before touching the operator.
Typical automatic gate repair in South Houston runs $180-$340 for mechanical and hardware work like re-anchoring, re-welding and adjustment, and $250-$600 when the job includes motor, control board or sensor replacement. The written estimate sets the final price.
When the Gate Drags, Check the Frame First
A gate that drags or binds often points to the frame or the track, not the motor. Rust and shifting footings on a weld-up frame will throw off alignment that a new operator can’t correct. We look at the structure before we quote electronics.
After Heavy Rain and Wind
Gulf Coast storms move things. Loops and safety photocells go out of alignment when a post shifts, and rack and pinion can stop tracking true. A post-and-weld check comes before a parts swap.
Electric Gate Motor in South Houston
Electric Gate Motor work in South Houston is a core part of what we do, not a side service. When a LiftMaster or Linear operator mounted low on the post gives out, salt-laden humidity and hurricane-season rain are usually in the story. Motor housings and control boards corrode faster here than inland, and a board that’s failed from moisture won’t be fixed by a bigger motor.
Electric gate motor repair in South Houston typically runs $250-$600 depending on whether it’s the motor, the control board or the power supply. A full electric gate repair call covering diagnosis and a motor or board replacement generally lands in that range. You’ll get a written price before any work starts, and it stays the price.
Control Boards and Corrosion
Boards mounted at post height catch splash and driving rain. When a board fails, we test the inputs before assuming the board is the whole story. Bad loops and wet connections can mimic a dead board.
Motors That Run but Don’t Move the Gate
If the motor hums or turns but the gate stays put, the operator may be fine and the drive train or post at fault. We check the mechanicals first. It saves you a motor you didn’t need.
Trusted Brands We Service in South Houston
We’re certified to service nine leading gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. That means when you call for electric gate repair in South Houston, the technician knows your system’s controls, limits and diagnostics before arriving. We don’t stock parts, and we’re independent, so we’re not pushing one brand over another. If your existing operator is serviceable, we repair it. That’s the whole point of brand-agnostic work: your gate gets fixed, not replaced for convenience.
Common Electric Gate Repair Problems We See in South Houston Homes
- Hinge post rust-through at the ground line. Galvanized steel and salvaged-pipe posts corrode where they meet wet soil, and the gate sags in a way no hinge adjustment can fix. Re-anchoring or replacing the post is the real repair.
- Corroded operator boards and housings. Salt-laden Gulf humidity eats low-mounted LiftMaster and Linear units. Moisture damage to a control board mimics other faults, so we test before replacing.
- Rack and pinion misalignment. Heavy rain and wind shift a post footing, and a slide gate stops tracking true. The rack, not the motor, is usually where the misalignment shows.
- Loop detector and safety photocell faults. Wet conditions and grime knock photo-eyes and loops out of service. The gate may stop short or refuse to close until they’re realigned or replaced.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in South Houston, TX
What you’ll actually pay depends on whether the fix is mechanical, electronic, or both. Hardware and frame work like re-anchoring posts, re-welding joints and adjusting hinges typically runs $180-$340. Motor, control board and sensor replacement generally falls between $250 and $600. A combined job, where a rusted post and a corroded board both need attention, can run higher, and we’ll tell you before we start.
Two things affect the number most: how far the corrosion has spread and whether the gate needs re-welding. Stainless fasteners cost a little more than painted ones, but they hold through hurricane-season wind and rain and save you another repair. The estimate is free, and the price is quoted and agreed before any work starts. Call for the estimate.
We Also Serve Cities Near South Houston
We cover South Houston along with the surrounding communities, including Pasadena, Galena Park, Deer Park and Webster. Same brand fluency, same gate-only focus, same free estimate. If your gate is in one of these nearby towns, call and we’ll book you into the schedule. The operator on your post gets the same specialist treatment whether the gate is ornamental or a working weld-up frame.
Serving South Houston, TX – Our Local Coverage Area
We serve South Houston and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in South Houston
Salt-laden Gulf humidity and frequent heavy rain accelerate corrosion on hinges, posts, welds and operator boards compared with inland areas. Galvanized steel rusts at the ground line and weld points first, and stainless fixings last longer than painted ones. Call (855) 772-8171 for a free estimate.
It’s usually the post, not the motor. A hinge post that’s rusted through at the ground line throws off the rack and pinion so the gate drags no matter how well the operator runs. A technician checks the footing and welds before touching the operator. Call (855) 772-8171 for an exact quote; estimates are free.
Re-anchoring or replacing the rusted hinge post and re-welding the frame joints is the realistic fix, with stainless fasteners to slow the next round of corrosion. Adjusting hinges alone won’t hold on a post that’s failed at the ground. Call (855) 772-8171 to book an estimate.
Yes. Safety photo-eyes and loop detectors are standard on automatic gates, and they’re especially important on mixed-use lots where people and vehicles share the entry. Wet weather and shifting posts knock them out of alignment, which stops the gate working correctly. Call (855) 772-8171 for a free estimate.
It can work, but a weld-up steel gate on a rusted or shifted post will still drag no matter how good the solar operator is. Get the frame and footing right first, then the solar unit has something to drive. Call (855) 772-8171 and we’ll give you a written price before any work starts.
Get a Free Estimate on Electric Gate Repair in South Houston
Whether your gate is stuck open, dragging, or just not responding to the keypad, the fix starts with a proper diagnosis. We’re gate specialists, trained across nine brands and focused only on gate repair, electric gate repair and installation. Call (855) 772-8171 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The price is quoted and agreed before any work starts.
Written by the team at Pasadena Gate Service.