Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Channelview, TX
If you need a gate company in Channelview, TX, the right call depends on what your gate has to survive. On the Ship Channel side of town that usually means heavy steel, frequent truck access, salt air and rust that never takes a day off. Our work centers on Gate Installation that suits those conditions, whether it’s a chain-link driveway gate on a large residential lot off 77530 or a sliding cantilever gate at a yard entrance. We’re gate specialists, not generalists, and our technicians have up to 15 years of experience. Call (855) 772-8171 for a free estimate.
Why Channelview Homes Are Different
Channelview sits right on the Houston Ship Channel industrial corridor, and that shapes almost every gate job here. Refinery and plant-adjacent lots, warehouse yards and truck-access entrances dominate the commercial side, so gates get hit by constant heavy traffic, corrosive coastal air and flare-stack fallout that eats through hinges and operator housings faster than inland work ever sees. This isn’t a suburb of decorative garden gates.
Residentially, the picture is mostly modest mid-century and 1970s-80s single-family homes on large lots along the older streets, plus a growing set of newer subdivisions and manufactured homes. Many of those properties run chain-link and wrought-iron driveway and perimeter gates. Gulf Coast humidity, salt-laden air and heavy subtropical rain push rust on steel and swelling or rot on wood, and seasonal tropical storms and hurricanes make wind-sturdy, impact-rated hardware a recurring repair driver rather than an occasional one. Clay soil shifts under gate posts over time, which is why footing depth matters more here than the gate itself sometimes suggests.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Channelview Services
Most Channelview property owners call us about two things: a gate that’s stopped working and a gate that needs to be built or replaced properly the first time.
Gate Repair in Channelview
A stuck or sagging gate in Channelview usually traces back to corrosion and heavy use together. Salt air from the Ship Channel attacks hinges, rollers and latches, while constant truck traffic on commercial slide gates wears tracks and safety loops out well before the operator does. We diagnose the actual failure first and only recommend what the gate needs, not a replacement for the sake of one. Residential chain-link and wrought-iron perimeter gates that have swollen or shifted on clay soil get the same treatment. For the full breakdown, see our Gate Repair in Channelview page.
Electric Gate Repair in Channelview
Automated gates along the industrial corridor take a beating that control boards and motors weren’t always designed for, and the failures show up in wiring, loop detectors and access systems as often as in the motor itself. Generalist companies often can’t read the fault, which is why we treat electric work as a core skill rather than a side service. We test the operator, the board, the safety edges and the loops methodically before touching a part. Details live on our Electric Gate Repair in Channelview page.
Gate Installation in Channelview
Gate installation in Channelview has to account for the specific lot it’s going on. The older homes on large lots generally have room for a wide swing or slide gate but posts that have settled into clay, while newer subdivisions and manufactured-home properties often need a fresh gate that can handle Gulf humidity without rusting through in a few seasons. If a gate here has corroded fast, it’s usually because it was specified for a dry climate and installed on a Ship Channel lot. We handle Gate Installation from measurement through final operator testing, and we quote the price in writing before any work begins.
Driveway Gate Installation
Signs you need it
You need driveway gate installation when an existing gate has rusted through, sits crooked on shifting soil, or was never sized to fit the actual opening on your lot.
What it costs in Channelview
Most driveway gate installations in Channelview run in the estimated range we quote per job, with the written estimate setting the final price once we’ve measured the opening and checked the posts.
How we do it
We measure the opening and check footing depth and soil condition, set new posts to proper depth, hang the gate with hardware suited to salt air and humidity, and test the full swing or slide before we leave.
Sliding Gate Installation
Signs you need it
A sliding gate makes sense when a swing gate won’t fit the lot, when a cantilever setup has cracked or come off its track, or when truck access needs a wider clear opening than a swing gate can give.
What it costs in Channelview
Sliding gate installation is quoted per job based on width, material and operator, so we give you a written estimate after we see the run and the ground it sits on.
How we do it
We lay out the track or cantilever run, prep the footing for the posts and the gate’s weight, set the frame and panels, then fit rollers, guides and safety loops and adjust the travel until the gate clears smoothly.
What Gate Installation Costs in Channelview
These are typical estimated ranges. Your written estimate after a measure is the final price.
| Item | Typical range in Channelview |
|---|---|
| Driveway gate installation | $1,800 – $5,500 |
| Sliding gate installation | $2,200 – $6,000 |
| Automatic gate operator installed | $900 – $2,800 |
Do you need a permit to install a gate in Channelview?
Most cities require a permit when you’re setting new posts or running electrical to an operator, so ask the City of Channelview’s building department before work starts. We can tell you what the job involves so you know what to ask.
Can you install a gate that stands up to salt air near the Ship Channel?
Yes – we specify hardware and finishes for coastal exposure, which is why a Channelview gate often outlasts a generic install that ignores corrosion. Call (855) 772-8171 for a free on-site estimate.
Brands We Service in Channelview
We work on your brand, whatever it is. Our technicians are experienced with LiftMaster, FAAC, BFT, Linear and others across the nine major brands we service, so they arrive familiar with your system rather than guessing. We don’t claim to stock parts locally – we diagnose, then source what’s needed. Turnaround depends on the part. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Channelview, TX
| Service | Typical range in Channelview |
|---|---|
| Driveway gate installation | $1,800 – $5,500 |
| Sliding gate installation | $2,200 – $6,000 |
| Automatic gate operator installed | $900 – $2,800 |
| Gate repair | $150 – $600 |
| Electric gate repair | $200 – $800 |
| Control board replacement | $250 – $700 |
| Loop detector replacement | $200 – $550 |
| Safety edge or sensor replacement | $150 – $450 |
In Channelview the price is pushed up by corrosion damage that goes deeper than it looks, heavy-duty commercial hardware for truck traffic, and wind-rated components for storm exposure. Every price is quoted and agreed before any work starts.
Neighborhoods We Serve in Channelview
We cover Channelview from the older residential streets on large lots to the industrial-adjacent properties closer to the Ship Channel. Because of the corridor layout, drive times vary a little more than in a compact suburb, so we give you an honest arrival window when you book. We answer 24/7, and fast dispatch runs 7am-7pm Sunday through Friday.
- Channelview proper along the older residential streets
- Ship Channel industrial corridor lots
- Newer subdivisions and manufactured-home properties
- Vinton and the western edges toward 77530
- Sheldon-area boundary properties
Service Area – Cities Near Channelview
Channelview is part of a wider patch of east Harris County we cover. If you’re just outside the city limits, we likely serve you too – check the neighboring pages for Galena Park, TX, Deer Park, TX, Pasadena, TX and La Porte, TX. Each has its own mix of residential and industrial gates, and the Ship Channel conditions carry across most of them. Not sure if your address falls in our coverage? Call and we’ll tell you straight.
Serving Channelview, TX – Our Local Coverage Area
We serve Channelview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Channelview
We answer 24/7 and dispatch fast from 7am to 7pm, Sunday through Friday. For a gate that’s stuck open on a commercial lot, that timing matters, so call and we’ll book the earliest opening. Call (855) 772-8171.
Yes. We install, repair and service gates for homeowners, HOA managers and commercial property owners across Channelview, from decorative driveway gates on residential lots to heavy-duty slide gates and cantilever systems at warehouse yards and industrial entrances.
Have the gate type, the brand of operator if you know it, and a rough description of what’s failing. That lets us tell you whether it’s a repair call or an install estimate, and whether we need to bring specific diagnostic gear. Estimates are free.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Channelview Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Erin Thompson"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Brooke Rhodes"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Danielle Sutton