Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Crosby
If your gate has stopped opening, drags through the gravel, or swung crooked after the last storm, we can take a look. Crosby is an unincorporated stretch of east Harris County where most properties sit on acreage, so the gates here are mostly long-driveway swing and slide units in pipe, ranch rail, wood and chain-link rather than the ornamental pedestrian gates you’d quote closer in. We know that hardware varies from one parcel to the next, and we work on what’s actually there instead of guessing. Call (855) 772-8171 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Crosby Homeowners Call Pasadena Gate Service for Gate Repair
Gate work in Crosby is its own trade. Because so many parcels are large and semi-rural, a stuck gate is usually a security or animal-containment problem, not a cosmetic one, and the people who live here need someone who understands that. We’re gate specialists, not generalists, and every technician on the job works on gates all day. Our technicians have up to 15 years of experience.
That focus matters when the equipment on-site isn’t a factory unit. On acreage, gates are often built by a fence crew or the homeowner, so hinges, posts and operators change from property to property. We diagnose the actual system in front of us before we recommend anything, and we work on your brand, whatever it is.
We also hear the same frustration from homeowners and HOA managers across Crosby: a technician shows up, can’t service their specific operator, and pushes a full replacement instead. That’s not how we work. Diagnosis first, solution second.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Commercial Gate Repair in Crosby
Commercial Gate Repair in Crosby usually means access control at the front of a property, and that access is often feeding livestock, equipment or a work yard behind the fence. The work covers operators, control boards, loop detectors, safety sensors and the heavy panels that ride on them, and a gate that won’t cycle can leave a business or a working parcel wide open. Typical commercial electric gate repair here runs $350-$650 depending on whether the fault is the motor, the board or the access hardware; a stuck slide gate or a panel off its track is often less. We quote the price and agree it with you before any work starts, and the written estimate sets the final figure.
Access Systems and Loop Detectors
Keypads, loop detectors and safety sensors take the most wear on a busy gate. When a detector fails, the gate can stop mid-cycle or refuse to close at all. We test each access component on-site so the fault gets found, not guessed at.
Operator and Board Diagnostics
Control board failures show up as erratic cycles, dead remotes or a gate that reverses for no reason. We read the fault, check the motor draw and wiring, and repair what’s failed where that’s the right call. We don’t push a replacement for profit.
Iron Gate Repair in Crosby
Iron Gate Repair in Crosby covers the steel and chain-link gates that carry the Gulf Coast weather hardest. High humidity and summer storms rust and pit steel, and the wind that pushes through open acreage loads a solid panel far more than a bar gate. We handle weld repair, hinge and post work, realignment and lock repair, and we treat rust before it turns structural. Typical iron and steel gate repair in Crosby runs $250-$550, and weld or rust repair on a larger gate can reach $700. Prices are agreed before we start, and the written estimate is what you pay.
Hinge and Post Repair
A heavy iron gate hangs on its posts, and a post pulled out of plumb puts all that weight on one hinge. We re-plumb the post, reset it to proper footing depth and correct the sag on the panel. That’s the fix that lasts through the season.
Weld and Rust Repair
Pitting and seam rust weaken the joints before you can see the damage. We clean the affected area, weld the failure and treat the metal so it holds. Call (855) 772-8171 to book an on-site look.
Trusted Brands We Service in Crosby
Whether your gate runs on LiftMaster, FAAC, BFT or Linear, we’re trained on your existing system rather than a brand we’d prefer to sell. We’re independently experienced with nine major gate brands, so technicians arrive familiar with the exact operator in front of them. Because we don’t stock parts, we identify the fault precisely on the first visit and order what’s needed, which keeps the turnaround tight and avoids swapping out working equipment. If your gate was built by a fence crew around a brand operator, that’s fine too. We’ll work out how the two fit together and get it cycling again. Call (855) 772-8171 to schedule.
Common Gate Repair Problems We See in Crosby Homes
- Hinge posts pulled out of plumb by clay movement. The region’s expansive clay soils shift seasonally, and a post that latched cleanly in spring often drags by the first dry spell. The lasting repair is re-plumbing and resetting the post in concrete, then correcting the sag on the panel and hinge hardware.
- Solid wood and ranch-rail panels warped and wind-loaded. Gulf Coast thunderstorms and hurricane-season gusts push hard on a solid infill gate. Warped panels strain hinges and operator arms, so we check the panel, the frame and the operator together.
- Steel and chain-link rusting and pitting. Heavy humidity eats at welds and seams year-round. Rust repair keeps a gate structural instead of letting the joint fail.
- Operators stressed by humidity and storm load. A motor working against a dragging gate burns out faster. We find whether the operator is the fault or the symptom of a post and panel problem.
Why Does My Crosby Gate Keep Dragging After Hinge Adjustments?
Because the hinge isn’t the problem. On a long gravel driveway, a pipe or ranch-rail swing gate that latched cleanly in spring sags or drags by the first dry spell because the region’s expansive clay has shifted the hinge post out of plumb. The usual cause is a shallow or poorly set post footing, so adjusting hinges only masks it for a few weeks. The lasting fix is re-plumbing and resetting the post in concrete with a sag correction on the panel and hinge hardware, then re-checking the latch and any operator arm. On automated gates we also verify the safety photocells and loop detector are working after the repair, and we show the homeowner the manual release so the gate can be swung open by hand during a power cut. Call (855) 772-8171 for an on-site estimate.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Crosby, TX
Typical gate repair in Crosby runs $180-$350 for hardware, hinge and latch work, $250-$550 for iron or steel repair, and $350-$650 for electric gate diagnostics and repair on an operator, board or access system. Post resetting and realignment fall in the middle of those bands, and a large sliding gate off its track can sit higher because it takes more hands. What moves the number is whether the fault is the gate itself or the operator, how heavy the panel is, and whether a post footing needs redoing. We look at the gate, give you a written price, and agree it with you before any work starts. The estimate is free, and the written estimate sets the final price. Call (855) 772-8171.
We Also Serve Cities Near Crosby
We work across the east Harris County area, including Channelview, Galena Park, La Porte and Deer Park, and you can reach our gate repair team from any of them. If you’re in Crosby and need a gate looked at, the same free estimate applies. Call (855) 772-8171. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Crosby, TX – Our Local Coverage Area
We serve Crosby and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Crosby
We dispatch across Crosby with fast dispatch from 7am to 7pm, Sunday through Friday, and same-day service is often possible on repair calls. Crosby is an easy run from our service area, and our technicians know the long gravel driveways and rural parcels that make up most of the town. Call (855) 772-8171 for a time window and an exact quote; estimates are free.
Yes, we cover Crosby from the older ranch parcels to the newer custom builds in the rural subdivisions, including 77532. That mix is what makes the work here different: new-build homes on cleared land sit next to decades-old parcels, so the gates vary wildly. We work on what’s installed rather than what we’d prefer. Call (855) 772-8171 to book an on-site estimate.
Often, yes. Same-day repair is possible on most hardware, hinge and alignment calls, and we’ll tell you honestly when we call. Work that needs a post reset or new hardware takes a scheduled visit because it’s measured and priced first. Call (855) 772-8171. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Use the manual release on your operator. On most LiftMaster and FAAC units there’s a release key or lever that disconnects the gate from the motor so you can swing or slide it by hand. Do that before you try anything else, and don’t force the gate while it’s still engaged. If the release itself is stuck, call us rather than prying at it. Call (855) 772-8171; estimates are free.
Wind load is the biggest stress a solid infill gate takes. Out on open acreage a solid wood or ranch-rail panel catches gust after gust, which warps the panel, strains hinges and works the post footing loose. After a storm, check the posts for lean and the panel for rattle. If it’s off, it needs re-plumbing and a hinge check, not just a nudge. Call (855) 772-8171.
It comes down to how far you are from power and how often you need entry. A long rural driveway often makes a solar opener the simpler choice, and a keypad helps if you have guests, deliveries or hired help coming and going. A qualified pro can tell you which suits your gate and operator once they’ve seen it. We’ll walk it through on an on-site estimate. Call (855) 772-8171.
Yes, and on acreage around Crosby that’s most of the gates we see. Installer-built gates in pipe, ranch rail, wood and chain-link often have mixed hardware and posts that were never set to the right footing depth. We diagnose the whole assembly, repair what’s failed and align the rest. Call (855) 772-8171 for a free estimate.
Storm-Proofing a Gate on a Long Rural Driveway
The biggest single failure we see on Crosby acreage is at the post footing. Expansive clay expands and contracts with the seasons, and that movement pulls a hinge post out of plumb, which throws a swing gate off its latch and loads the operator unevenly. A storm makes it worse: a solid wood or ranch-rail panel catches wind that a bar gate would pass through, and a saturated footing lets the post shift further. When the ground is soft after heavy summer rain, shallow footings give way. The fix is a post reset to proper footing depth in concrete, a panel and hinge check, and a close look at the operator arm and safety devices on an automated gate.
Power cuts are a separate matter and a common one after storms. Every automated gate has a manual release, and you should know where yours is before you need it. On most operators it’s a key or lever that disconnects the motor so the gate swings freely by hand; engage it, open the gate, then re-engage it once power is back so the operator resets its limits. If the gate is set on an incline, hold it as you release it. Don’t force anything that won’t move. Call (855) 772-8171 and we’ll sort it out.
What Happens When You Call
Tell us what the gate is doing and what it’s installed on. We ask about the brand and whether the gate is automatic, because that decides what we send and what to check first. Then we schedule an on-site visit, look at the gate, the posts and the operator together, and give you a written price. You agree it before any work starts. No surprises on the invoice, because the written estimate is the price.
Contact Pasadena Gate Service for Gate Repair in Crosby
If your gate is stuck, dragging, or damaged after a storm, call us. We’re gate specialists, not generalists, and we work on your brand whatever it is. From a stuck gate to a full installation, one call covers it. Call (855) 772-8171 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Pasadena Gate Service.