Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Webster, TX
Gate Installation in Webster starts with the lot, and the lots here are tight. The city grew up around the Johnson Space Center employment corridor in the post-war years, so most driveways and side-yard runs are narrow by modern standards. That shapes nearly every gate job we quote here: wood or ornamental steel swing gates on small ranch lots rather than wide sliders, and plenty of them original to the house. Salt air off the Gulf and hurricane-season wind make the hardware work harder than inland Houston ever asks of it. Call (855) 772-8171 and we’ll talk through what your gate is actually doing.
Why Webster Homes Are Different
Webster sits close enough to the bay that the air carries salt most days of the year, and that single fact rewrites the maintenance schedule. Steel hinges, operator arms and latch hardware facing the southeast wind rust through faster than the same parts do a few miles inland. Galvanizing slows it; nothing stops it entirely.
The housing stock adds its own pressures. Post-war and 1960s-70s ranch homes dominate the older single-family blocks, and a large share of gates on those lots are original wood or ornamental steel. Wood pickets swell in Gulf humidity, then bind against posts that have sagged a little more each rainy season. Narrow side-yard access rules out most wide sliding gates, so swing gates carry the load, and swing gates put every bit of stress on hinges and posts.
Then there’s June through November. Hurricane-season wind events test gate anchors, operator mounts and panel stiffness all at once, and a gate that squeaked through a calm spring can fail its first real gust. We look at uplift and anchor condition on every Webster installation for that reason. If you’re weighing a repair against starting fresh, our Pasadena Gate Service page lays out how we approach both.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Webster Services
Webster homeowners and property managers call us about two things more than anything else: gates that have stopped working and automated gates with a fault somewhere in the electrical system.
Gate Repair in Webster
Most of the repair work here comes down to rust, sag and hardware that has quietly given up. We check hinge condition, post plumb, latch alignment and panel integrity before touching anything, because a gate that drags is usually a post problem wearing a hardware costume. Coastal humidity means we see seized hinges on gates that look fine from the street. Wood gates on the older ranch lots near Clear Creek warp and bind, and a five-minute look tells us whether adjustment will hold or the post needs attention. Our Gate Repair in Webster page covers what a typical visit involves.
Electric Gate Repair in Webster
Automated gates fail in specific ways, and the salt air speeds up several of them. Operator arms corrode, control boards take moisture, and safety sensors lose their alignment after a storm shifts a post a fraction of an inch. We work on LiftMaster, FAAC, BFT and Linear systems among others, so we arrive already familiar with the unit on your property rather than reading a manual at the curb. Diagnosis comes first: we find the actual fault instead of selling a replacement. Details live on our Electric Gate Repair in Webster page.
Gate Installation in Webster
Gate Installation in Webster means building for salt, humidity and storm wind at the same time, on a lot that probably doesn’t leave much room. The older ranch properties around the NASA Road 1 corridor often still have their original gate, and when rust has eaten the hinges and the posts have leaned, replacing beats patching. We handle the full scope of Gate Installation for homes, HOAs and small commercial properties, from measure to final swing test. Narrow side yards mean we site the gate around the actual clearance you have, not a catalog assumption. On a lot facing the southeast salt wind, we spec hardware and finishes that hold up to it. The goal is a gate that survives its first hurricane season and its fifth.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car in the rain, or the existing operator has corroded to the point where repair costs approach replacement.
What it costs in Webster
A typical automatic gate installation in Webster runs $2,500 to $6,500, with the operator, arms and controls included depending on the system, and the written estimate sets the final price.
How we do it
We measure the opening and check post condition, mount and align the operator to the gate’s actual travel, run and protect the power and control wiring, set the safety sensors, then cycle-test the full range before we call it done.
Driveway Gate Installation
Signs you need it
The old gate no longer closes flush, the posts have leaned past adjustment, or the panel has rusted through at the hinge points.
What it costs in Webster
A typical driveway gate installation in Webster runs $1,800 to $5,500 depending on material, width and whether an operator is included, and the written estimate sets the final price.
How we do it
We set posts to proper footing depth for the soil and gate weight, hang the panel square to the opening, fit hinges and latches rated for coastal exposure, and confirm clearance through the full swing.
Sliding Gate Installation
Signs you need it
A swing gate won’t clear the driveway slope or the side-yard space, and you need the opening back.
What it costs in Webster
A typical sliding gate installation in Webster runs $3,000 to $7,500 depending on width, material and operator, and the written estimate sets the final price.
How we do it
We lay the track level on a proper foundation, set the posts and end stops, hang and balance the panel, then fit the operator and safety edges and run a full open-and-close cycle test.
What Gate Installation Costs in Webster
| Item | Typical range in Webster |
|---|---|
| Automatic gate installation | $2,500 – $6,500 |
| Driveway gate installation | $1,800 – $5,500 |
| Sliding gate installation | $3,000 – $7,500 |
Can you install a gate on a narrow Webster side yard?
Yes. Most Webster side-yard runs are tight, so we measure actual clearance and usually recommend a swing gate sized to the opening rather than forcing a slider. We confirm the layout before anything is ordered.
How long does a gate installation take in Webster?
Most residential installations are measured and scheduled, then finished in a day or two on site depending on footing and power work. Coastal hardware and custom panels add lead time, and we confirm the schedule with your written estimate.
Brands We Service in Webster
We work on the brand that’s already on your property, whether that’s LiftMaster, FAAC, BFT or Linear, and our technicians arrive familiar with the system rather than guessing at it. You can see the full list on our brands page. Most diagnostics wrap up on the first visit.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Webster, TX
| Service | Typical range in Webster |
|---|---|
| Automatic gate installation | $2,500 – $6,500 |
| Driveway gate installation | $1,800 – $5,500 |
| Sliding gate installation | $3,000 – $7,500 |
| Gate repair (hinges, latches, alignment) | $150 – $450 |
| Gate post repair or reset | $250 – $750 |
| Electric gate repair (motor or control board) | $250 – $900 |
| Safety sensor or loop detector repair | $180 – $550 |
| Operator replacement | $900 – $2,800 |
Coastal exposure is the biggest price driver here: hardware rated for salt air costs more than inland-grade parts, and storm-damaged posts sometimes need replacement rather than reset. We quote and agree the price before any work starts, so the written estimate is what you pay.
Neighborhoods We Serve in Webster
We cover the whole of Webster, from the older ranch blocks off NASA Road 1 to the rental and townhome clusters near the Johnson Space Center corridor. Narrow side yards and original gates are common across these areas, so we bring the hardware to handle both. Expect fast dispatch from 7am to 7pm, Sunday through Friday.
- Clear Creek area
- NASA Road 1 corridor
- Nassau Bay side streets
- 77598 residential blocks
Service Area – Cities Near Webster
Webster sits in the middle of a stretch of Gulf Coast towns with the same salt air and the same storm-season pressures on gate hardware. We also work in Friendswood, TX, Seabrook, TX, Pasadena, TX and South Houston, TX. If you’re just outside those lines, call and we’ll confirm coverage before booking anything.
Serving Webster, TX – Our Local Coverage Area
We serve Webster and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Webster
We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday, so most Webster calls get a same-day visit when you reach us within dispatch hours. Call (855) 772-8171 to book.
It depends on the gate’s height, its power connection and your property line, so ask the city before work starts. We can tell you what the installation involves, but the permitting call belongs to your local building department.
Yes. We work with HOA managers and commercial property owners as well as homeowners. If your association has design or material rules, share them before we quote so the estimate matches what will actually be approved.
We’re closed Saturday. Call and we’ll book you into the next opening, Sunday through Friday, 7am to 7pm. If the gate is stuck open and security matters, keep the area clear until a technician arrives.
Call (855) 772-8171 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 15 years of experience, and the price is quoted and agreed before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Webster Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Erin Thompson"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Brooke Rhodes"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Danielle Sutton