Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in South Houston, TX
South Houston (77587) sits in a tight pocket east of Hobby Airport where homes share lot lines with truck yards and workshops, and that mix shapes every gate installation we quote here. Driveway gates on these properties are usually chain-link or weld-up steel, not the decorative wood and ornamental metal you’ll see in master-planned suburbs. We’re a gate specialist, not a general handyman, and Gate Installation is the work we do most in this city. Whether you’re replacing a failing fence-line gate at a home or putting in an access gate for a workshop, we install equipment we know inside out. Call (855) 772-8171 to start with a free on-site estimate.
Because equipment matters as much as labor, our technicians handle LiftMaster and FAAC operators regularly, plus others, and they arrive already familiar with the system on your property.
Why South Houston Homes Are Different
Gulf Coast humidity is the first thing that affects gate work here. Frequent heavy rain and hurricane-season wind wear on galvanized steel and chain-link posts at the ground line, where moisture sits longest, and at the weld points that hold the frame together. A gate that looks solid above knee height often has rust working silently at its base. Wood gates swell and sag in this climate; steel ones corrode. Both need storm-ready reinforcement as part of any serious installation.
The housing stock makes this harder. Most South Houston homes are mid-20th-century single-story frame and brick houses on small lots, many with the original chain-link fencing still standing. That fencing anchors gates designed decades ago for a different era of vehicle and property use. Because so many properties sit near industrial lots along the flight corridor, technicians routinely find gates built from salvaged pipe and weld-up frames that fail at hinges and posts rather than latches. Repairing those means re-anchoring posts and re-welding, not just swapping hardware, and installation means starting from a properly footed, square frame rather than patching onto a tired one.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main South Houston Services
Two jobs come up again and again across South Houston, and both deserve a specialist rather than whoever answers the phone first.
Gate Repair in South Houston
Most repairs in this city trace back to hinge and post failure on weld-up or chain-link gates, because the salvaged-pipe construction common on mixed-use lots along the industrial corridor puts loads where light residential hardware was never designed to carry them. We re-anchor posts, re-weld frames and square gates properly rather than only adjusting the latch. Corrosion at the ground line is the other frequent culprit after a heavy-rain season, and confirming what’s failing before recommending anything is how we work. Learn more about Gate Repair in South Houston.
Electric Gate Repair in South Houston
Automated gates around Hobby Airport’s industrial-residential mix see a lot of traffic, and that shows up as motor strain, worn control boards, failing loop detectors and access systems that no longer read correctly. Generalists often stall on these because the electrical and control side needs a gate specialist, not a jack-of-all-trades. We diagnose the actual fault before recommending a fix, so you’re not paying for parts you didn’t need. Learn more about Electric Gate Repair in South Houston.
Gate Installation in South Houston
Installing a gate on a South Houston property means working with mid-20th-century homes, original chain-link fencing and a Gulf Coast climate that punishes anything underbuilt. On the mixed-use lots near the flight corridor, that usually means a heavy-duty chain-link or weld-up steel gate built to handle truck-yard traffic rather than ornamental residential work. The goal is a frame that’s footed deep enough and welded strong enough to survive humidity, heavy rain and hurricane-season wind for years, not a patch over a tired post. Our technicians have up to 15 years of experience, and gate installation runs from a free on-site measure through the finished, tested gate.
Driveway Gate Installation
Signs you need it
You need a new driveway gate when the existing posts have rusted through at the ground line, the frame has warped so badly it no longer closes square, or the fence line has been replaced and the old gate no longer fits.
What it costs in South Houston
Driveway gate installation here typically runs from around $1,800 to $6,500 depending on width, material and whether an operator is included, with the written estimate setting the final figure.
How we do it
We measure the opening, set new posts to proper footing depth, build or hang the gate to match the fencing, and test the swing or slide before we call it done.
Automatic Gate Installation
Signs you need it
Automatic entry is worth considering when your property sees regular vehicle traffic and someone is constantly getting out to open a manual gate, or when you want controlled access for a workshop or truck yard.
What it costs in South Houston
Automatic gate installation typically spans roughly $2,500 to $7,500, depending on gate size, operator brand and access features, quoted in writing before any work begins.
How we do it
We build the gate or confirm the existing one is sound, mount the operator, run power and controls, set the safety sensors and walk you through operation.
What Gate Installation Costs in South Houston
| Item | Typical range in South Houston |
|---|---|
| Driveway gate installation | $1,800 – $6,500 |
| Automatic gate installation | $2,500 – $7,500 |
| Sliding gate installation | $2,200 – $7,000 |
Can you install a gate on a lot with an old chain-link fence line?
Yes. We measure the existing fence line, set new posts to proper footing depth and build a gate that matches the fencing, even when the original framing has rusted or shifted.
Do you handle the power run and safety sensors on automatic gates?
Yes. Our technicians handle the operator wiring, controls, loop detectors and safety edges as part of the installation, then test everything before the gate is handed over.
Brands We Service in South Houston
Our technicians are factory-trained across nine major gate brands, including LiftMaster, FAAC, BFT and Linear, so they arrive familiar with the operator on your property instead of guessing. If your system needs parts we don’t have, we’ll tell you straight and give you a realistic timeline. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in South Houston, TX
| Service | Typical range in South Houston |
|---|---|
| Driveway gate installation | $1,800 – $6,500 |
| Automatic gate installation | $2,500 – $7,500 |
| Sliding gate installation | $2,200 – $7,000 |
| Gate repair | $150 – $650 |
| Electric gate repair | $200 – $900 |
| Motor or operator replacement | $450 – $1,400 |
| Control board repair | $250 – $700 |
| Loop detector replacement | $200 – $550 |
| Post re-anchoring or re-welding | $250 – $800 |
Price in South Houston is pushed up by gate width and weight, by whether the existing posts and fence line can be reused, and by access features on automatic systems. We give you an upfront price before any work starts, so the written estimate is the number you pay.
Neighborhoods We Serve in South Houston
We work across South Houston’s small, densely packed footprint, from the streets just east of Hobby Airport to the mixed industrial-residential blocks that run toward the city limits. Because the city is compact, response times stay tight across the whole area, and a same-day visit is often possible for repair calls. Fast dispatch from 7am to 7pm, Sunday through Friday, keeps jobs moving.
- Hobby Airport corridor
- Downtown South Houston
- Spencer Highway area
- College Avenue corridor
- Edgebrook neighborhood
Service Area – Cities Near South Houston
South Houston sits close to several neighboring communities, and we cover gate work across all of them. If you’re just outside the city limits, we likely still reach you. Check our pages for Pasadena, TX, Galena Park, TX, Deer Park, TX and Webster, TX for details on each area, then call us to confirm coverage and book a free estimate.
Serving South Houston, TX – Our Local Coverage Area
We serve South Houston and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in South Houston
Most repair calls in South Houston can be scheduled the same day or next, depending on the job and parts needed. Call (855) 772-8171 and we’ll confirm a time that works.
Permit rules vary, so check with the City of South Houston building department before work begins, and check with your HOA if you have one. We can walk you through what a typical installation requires.
Yes. We handle residential, HOA and commercial gate work across South Houston, including the mixed-use and industrial lots near the Hobby Airport corridor, where heavy-duty steel gates are common.
Whether you’re replacing a rusted chain-link gate, automating a driveway entrance or fixing an operator that’s stopped responding, our team can quote it in writing with no surprises. Call (855) 772-8171 for a free estimate and we’ll get your gate sorted.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What South Houston Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Erin Thompson"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Brooke Rhodes"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Danielle Sutton